號：ZL 2020 2 1627992.8

公司簡介

泰州印染機械有限公司成立于1978年，座落于歷史文化名城江蘇泰州。公司占地超過50畝，現有員工120余人。公司目前擁有配件分廠和組裝分廠兩個廠區。產品包括導布輥，烘筒，梅花輥，烘燥機，燒毛機，水洗機等設備。企業榮獲國家企業，江蘇省民營科技企業等稱號。擁有包括梅花輥，燒毛機，高效振蕩水洗機，雙層高效節能烘筒等多項技術。

Company Introduction

Taizhou Printing and Dyeing Machinery Co., Ltd. was founded in 1978, located in the famous historical and cultural city Taizhou, Jiangsu.The company covers an area of more than 50 acres and has more than 120 employees. At present, the company has two parts factory and assembly factory.Products include cloth guide roller, drying drum, plum roller, drying machine, singing machine, washing machine and other equipment.The company has won the title of National High-tech Enterprise and Private Science and Technology Enterprise of Jiangsu Province.The company has a number of patented technologies including plum roller, singeing machine, high efficiency oscillating washing machine, double-stack high efficiency and energy saving drying roller, etc.

生產資質 Production qualification	認證 Patent

高效節能雙層蒸汽烘筒結構優勢：

1、高效節能雙層蒸汽烘筒，縮小了烘筒內部的多余空間，在滿足紡織品烘干要求的熱能的基礎上，能夠以較快的速度將內部的冷凝水排出，減少了因為冷凝水導致的蒸汽的浪費；

2、內部空腔的體積的減少，所需提供的蒸汽壓力也可以適當減少。綜合改善了烘筒的能耗。

High-efficiency and energy-saving double stack steam drying roller structure advantages:

1. The high-efficiency and energy-saving double-layer steam drying roller reduces the excess space inside the drying drum. On the basis of meeting the thermal energy required for textile drying, the condensed water inside can be discharged at a faster speed, which reduces the waste of steam caused by the condensed water;

2.The volume of the internal cavity is reduced, the steam pressure required to provide can also be appropriately reduced.The energy consumption of the drying roller is improved comprehensively.

特征：
1、蒸汽壓力： 設計壓力：0.6Mpa；
工作壓力：0.58Mpa；
2、表面溫度： 設計溫度：153℃
工作溫度：151℃
3、尺寸參數： 烘筒直徑：
φ570mm、φ760mm、φ800mm、φ1250mm；
烘筒輥面長度：600-3600mm；
4、外筒體：材質為304不銹鋼，厚度為2.5-3mm；
5、內筒體：材質為304不銹鋼，厚度為6mm；

Characteristic:
1. Steam pressure:
Design pressure: 0.6Mpa;
Maximum working pressure: 0.58Mpa;
2. The surface temperature:
Design temperature: 153℃;
Working temperature:151℃.
3. Size parameters:
Drying roller diameter: φ570mm, φ760mm, φ800mm, φ1250mm;
Length of the surface of the drying roller: 600-3600mm;
4. Outside the cylinder:
The material is 304 stainless steel, and the thickness is 2.5-3mm;
5. Inside the cylinder:
The material is 304 stainless steel, the thickness is 6mm;

雙層蒸汽烘筒烘燥機現場安裝照片：
Photo of site installation of double stack steam drying roller:

建議使用方案1：串聯法

上圖為10-φ800mm雙層烘筒烘燥機（兩支烘筒串聯使用）示意圖。 每兩支烘筒配一只疏水器及止回閥； 蒸汽節約率如下圖所示：
The figure above is a schematic diagram of the 10-φ800mm double-stack dryer (two drying rollers in series), each two drying roller is equipped with a trap and check valve; Steam saving rate is shown in the figure below:

建議使用方案2：蒸汽噴射泵

上圖為烘干機蒸汽噴射加熱系統。 * 紅色管道為蒸汽噴射泵管路示意圖
Above is the steam jet heating system of the dryer. * The red pipeline is the schematic diagram of steam injection pump pipeline

蒸汽噴射加熱是一種全新的加熱理念，通過溫控表自動設定加熱溫度，操作更簡單更方便；噴射加熱實現了乏汽回收，大大節省了蒸汽用量，降低了冷凝水排放溫度；噴射加熱使得烘筒表面溫度更加均勻，極大改善了預縮工序和葉邊疵布的產生，大大提高了烘燥效率。
Steam jet heating is a new heating concept, through the temperature control meter automatically set the heating temperature, the operation is more simple and convenient; Jet heating can realize the recovery of steam, greatly save the amount of steam, reduce the condensate discharge temperature; Jet heating makes the surface temperature of the drying cylinder more uniform, greatly improves the pre-shrinking pro cess and the generation of defective cloth at the leaf edge, and great ly improves the drying efficiency.

可調控蒸汽噴射泵：

可調控噴射泵主要用來促進蒸汽循環，提高低壓蒸汽壓力；
其原理是利用少量高（中）壓蒸汽作為主動蒸汽產生的負壓，將低壓引射蒸汽（乏汽）抽吸入熱泵泵體，并將之加壓混合成一股均勻的壓力較高的可用蒸汽，重新送回到系統中去（烘筒內）加以利用。

Adjustable jet pump is mainly used to promote steam circulation and improve low pressure steam pressure;
Its principle is to use a small amount of high (medium) pressure steam as the nega tive pressure generated by the active steam, the low pressure ejection steam (lack of steam) is pumped into the pump body, and the pressure is mixed into a uniform high pressure available steam, and sent back to the system (in the drying cylinder) to be used.

烘干輔助：高效液壓軋車

1、高效液壓軋車：
適用于烘燥機前使用，大大降低蒸汽耗量；節約能源；
High efficiency hydraulic
Rolling padder:
Suitable for drying machine before use, greatly reduce steam consumption; Saving energy;

配置：
1、軋余率可達38-42%；
2、上主動鋼輥直徑φ400mm；
3、下被動橡膠輥直徑φ410mm；
4、液壓油泵系統1套；
5、液壓油缸2臺；
Configuration:
1、The roll-over rate can reach 38-42%.
2、The diameter of the upper driving steel roller is 400mm;
7、The diameter of the lower passive rubber roller is 410mm.
6、01 set of hydraulic oil pump system;
5、02 pcs hydraulic cylinders;

2、高效液壓斜軋車： High efficiency hydraulic cross rolling padder:

應用及優勢：
1、用于拉幅定型機前做軋液車使用，可減少能源消耗，提高生產效率，提高軋液均勻性；
2、各烘干、脫水段前做軋水車使用，以減少烘干時的能源消耗，提高烘干效率，縮短工藝流程時間；
Application and advantages:
1、It is used as a liquid rolling car before the stenter setting machine，which can reduce energy consumption，improve production effciency and improve the uniformity of rolling liquid;
2、It is used as a rolling mill before each drying and dehydration section to reduce energy consumption during drying，improve drying efficiency，ａnd shorten process time.